Avill autóvillamosság - Kinsztler Lajos - Avill autóvillamosság - Kinsztler Lajos

Helpful!

Excellent professional

Precise, accurate and courteous service. He's a good professional.

Excellent specialist!

There are few such dedicated and highly trained professionals!

Dear Lajos! Thank you for stopping by him so quickly and doing my largely disassembled (Opel Vivaro) generator. But I wasn't happy when you asked "What did you want with this bearing?" When you took over the generator? Because I still wanted to put the original factory bearings back after washing and greasing. I accepted your opinion. I note here it had to be repaired because oil flowed in the generator, causing the bronze brush and slip ring to wear out. It was the fault, not the bearing. The generator has 2 bearings. I pulled one off the shaft (in perfect condition), which is a factory polish. The other bearing you pulled off the shaft was a French and immovable burnt-in bearing. Background: since I wanted to repair the generator, I visited a parts store in Kiskunhalas and bought bronze brushes and a factory (non-aftermarket) slip ring. In the store, the seller said, I can not repair this generator because the part between the aluminum frame and the standing part has to be poured with liquid rubber. I got a business card from them named Lajos Kinsztler. Because here only he can pour it out locally. That's when I realized that I couldn't completely fix the generator, so I approached Lajos Kinsztler. He took over and took over the partially disassembled generator and the newly purchased parts, saying good. It will build with this. The next day the phone rings, the generator is ready. Thank you for that, it was a quick job. Whether it is beautiful, I would detail this. That’s when I started to doubt your job for the first time. Even when I picked it up, I said it wasn’t possible in the generator because even you could easily rotate it without noise. Your answer was “and that was it”. You noted this generator has a lot more miles than I said. No more miles and no repairs yet! It worried me, so I called you from home that you might not have just shown me the bearing removed. Here comes the other surprise. You went down. I, as a layman, wouldn't tell me which bearing was in it and you hung up. This response was not reassuring. Did you replace the bearing? If you replaced it, why did the generator shaft with “new bearings” start rattling now? I approached another senior experienced mechanic in Kiskunhalas for a review. I decided to dismantle the generator that was said to have been refurbished a couple of hours ago. The bearings were really new. However, the slip ring I bought was not built in, you kept it for yourself and you didn’t install a poorer aftermarket and it wasn’t perfectly adjusted. 1) The bearing you removed was good - you kept it to yourself. 2) You took over the factory slip ring from me - you kept it for yourself. You put aftermarket. 3) You undertook this work for HUF 30,000, but at the time of payment it was HUF 32,500. I then inquired with other mechanics. The work is done for 10-15,000 HUF. 4, I have not laid you down, I have not called you a liar, a deceitful, dishonest man. And you cheated. You cheated on several lines. You called me, you have been doing this business for 30 years. What do I mean by that? -To deceive people ?! Attila Zadravecz